Emergency Services25 min read
Ultimate Guide to Deadbolt Placement for Security
By Roadrunner Lock and Key ·
The standard deadbolt height is a strike centerline about 48 inches above the bottom of the door frame,[1][2] a few inches above the knob. Accessibility codes keep operable door hardware between 34 and 48 inches above the floor.[3] That rule governs public buildings and is a sound target at home. A keypad above the bolt can pass 48 inches.[2]
What no other homeowner guide we found puts in one place: the spacing above the knob from Kwikset's and Schlage's own templates, where that spacing lands against the 48 inch limit, when the rule reaches a private home, and how to measure a keypad deadbolt before you drill.
Deadbolts are one of the most effective ways to secure your home or business. Proper placement and installation ensure they perform as intended to resist forced entry. Here’s what you need to know:
- Deadbolt Types: Choose from single-cylinder, double-cylinder, or keyless options based on your security needs and door design.
- Security Grades: ANSI/BHMA grades (1 to 3) measure durability and strength. Grade 1 offers the highest protection.
- Placement: Install the deadbolt 4 to about 5-1/2 inches above the doorknob, per the Schlage and Kwikset templates, and make sure the bolt extends fully into the strike.
- Installation Tips: Use reinforced strike plates and long screws that reach the framing behind the jamb.
- Common Mistakes: Avoid improper height (the strike line is 48 inches from the bottom of the frame), misaligned holes, or inadequate reinforcement.
For added peace of mind, professional locksmith services can ensure proper installation and address vulnerabilities. Investing in quality deadbolts and reinforcement measures significantly improves door security.
Deadbolt Types and Security Grades
Deadbolts come in three common types: single-cylinder (key outside, thumbturn inside), double-cylinder (key on both sides) and keyless (keypad or smart). Strength is rated under ANSI/BHMA standards. Many BHMA standards use grades 1, 2 and 3, with grade 1 the highest,[4] and the residential deadbolt standard, A156.40, grades durability, strength and security, and finish separately as A, B or C.[5]
Choosing the right deadbolt isn't just about picking what looks good, it's about balancing convenience, security, and suitability for your home. Here's a breakdown of the main types and their security ratings to help you make an informed decision.
Single-Cylinder, Double-Cylinder, and Keyless Deadbolts
Single-cylinder deadbolts are the most common choice for U.S. homes. They have a key slot on the outside and a thumb-turn on the inside, making them easy to use and budget-friendly. The thumb-turn allows for a quick exit in emergencies, but there's a downside: if a nearby window is broken, an intruder could reach in and unlock the door using the thumb-turn. This makes single-cylinder locks less secure for doors near glass panels.
Double-cylinder deadbolts, on the other hand, require a key on both sides of the door. This design eliminates the thumb-turn vulnerability, making them a better option for doors with nearby windows or glass panels. However, there's a trade-off: you’ll need a key to exit, even in emergencies, which can be a safety concern. In fact, some local building codes limit their use in residential homes for this very reason. Double-cylinder locks are also more expensive than single-cylinder options, but they provide a higher level of security, ideal for homes in high-crime areas or for doors with glass elements.
The 2021 International Residential Code, which New Mexico adopted for homes,[6] says: "Egress doors shall be readily openable from inside the dwelling without the use of a key or special knowledge or effort".[7] A double-cylinder deadbolt needs a key from inside, so ask your building department before you put one on the main exit door.
Keyless deadbolts offer a modern alternative by replacing physical keys with a keypad or touchscreen for entering a code. These are perfect for anyone prone to losing keys or who needs to grant temporary access. For even more convenience, smart deadbolts take it a step further by allowing remote operation, smartphone app control, and integration with smart home systems. These advanced features make keyless options both practical and secure for tech-savvy homeowners.
Once you've chosen a type, the next step is understanding how deadbolts are rated for security.
ANSI/BHMA Security Grades
To ensure you're getting a deadbolt that meets your security needs, it’s essential to understand the grading system developed by the American National Standards Institute (ANSI) and the Builders Hardware Manufacturers Association (BHMA). Deadbolts are graded on a scale from 1 to 3, with Grade 1 offering the highest level of security.[4] These grades are based on factors like durability, strength, and resistance to force.
| Rating system | Scale | What it measures | How to find a lock's rating |
|---|---|---|---|
| ANSI/BHMA grade (many BHMA standards) | Grade 1, 2 or 3; Grade 1 is the highest | Progressive levels of performance benchmarks set in each standard[4] | The BHMA product number, or BHMA's product directory[4] |
| ANSI/BHMA A156.40, residential deadbolts (approved January 15, 2015) | A, B or C in each of three categories | Durability; strength and security; finish, each graded on its own[5] | The grade the manufacturer lists for each category[5] |
Grade 1 deadbolts are built to withstand heavy use and provide the highest level of security, making them ideal for commercial settings or high-security residential areas. Grade 2 deadbolts are a step down but still offer solid protection. These are a great choice for homeowners who want extra security without the cost of commercial-grade hardware. Grade 3 deadbolts provide basic protection and are commonly used as a secondary lock or for areas with lower security needs.
Grade 3 meets the lowest benchmark on the scale, so for an exterior door a Grade 2 or Grade 1 deadbolt buys more margin. Keep in mind, though, that even the best deadbolt is only as secure as the door and frame it’s installed on.
If you're unsure about which deadbolt suits your needs, Roadrunner Lock and Key offers expert advice and 24/7 services throughout Albuquerque to help you make the right choice.
Deadbolt Placement for Different Door Types
Deadbolt placement starts at the frame. The Steel Door Institute's hardware location drawing puts the deadlock strike centerline at 48 inches, "or as required by local code," and the lock strike at 38 to 42 inches.[1] The manufacturer then sets the spacing above the knob: about 5-1/2 inches on Kwikset's drilling instructions[8] and 4 inches on Schlage's B-Series template.[9]
Deadbolt placement depends on the type of door, its material, and location. Proper positioning is key to creating a strong defense against break-ins.
Standard Deadbolt Height Placement
Typically, deadbolts are installed a few inches above the doorknob or lever. Measure from the center of the knob to the center of the deadbolt. Kwikset's instructions place the deadbolt centerline approximately 5-1/2 inches (140 mm) above the centerline of the knob or lever,[8] and Schlage's B-Series template recommends 4 inches from the center of the deadbolt to the center of the lock.[9] If your door features decorative hardware, follow that hardware's own template rather than stretching the gap.
Here is where that spacing lands. We took the Steel Door Institute's 38 to 42 inch lock strike range[1] and added each manufacturer's spacing:
| Knob or lever centerline | Schlage B-Series, 4 in above[9] | Kwikset, about 5-1/2 in above[8] | Old "12 inches above the knob" rule |
|---|---|---|---|
| 38 in | 42 in | 43-1/2 in | 50 in |
| 40 in | 44 in | 45-1/2 in | 52 in |
| 42 in | 46 in | 47-1/2 in | 54 in |
Both templates keep the deadbolt centerline under 48 inches at every knob height in that range. The old rule of 6 to 12 inches above the knob, which this guide used to print, does not: at 12 inches it lands at 50 to 54 inches. Neither manufacturer's instructions we opened say 6 to 12 inches.
The frame drawing and the templates are two ways of locating the same lock. The frame puts the strike line at 48 inches from the bottom of the frame;[1][2] a residential template measures up from your knob. If your knob sits low, the deadbolt lands below 48 inches, and that's fine. No source we opened treats 48 inches as a minimum.
When it's locked, the bolt should extend fully into the strike. Kwikset's instructions bore the strike hole 1 inch deep,[10] so a full throw has room.
Placement for Different Door Materials
The material of your door plays a crucial role in how a deadbolt is installed. Each type of door material has its own set of considerations:
- Wood doors: These are the most common and typically range from 1-3/8 to 1-3/4 inches thick, which accommodates most standard deadbolts. Schlage's B-Series template marks the drilling center for both thicknesses.[9]
- Fiberglass doors: Often built with a foam core, these require extra care during installation to ensure the deadbolt is securely supported.
- Steel doors: Installing a deadbolt on steel doors requires metal-cutting tools to properly create the necessary openings.
Securing Entry, Back, and Side Doors
Every exterior door, including the one connecting your garage to your home, should have a deadbolt for added security.
- Front doors: Place the deadbolt at the spacing its template calls for above the handle and reinforce the door jamb.
- Back and side doors: These are often targeted by intruders due to their lower visibility. If these doors feature glass panels or non-standard dimensions, choose a deadbolt that accounts for these factors. Reinforce the jamb and consider additional security measures.
For outward-opening doors, ensure the deadbolt fully extends when locked. Reinforce the strike plate and the hinge side using long screws that reach the wall stud; Kwikset's instructions drill 3-inch-deep pilot holes for the strike screws nearest the jamb.[10] Adding a metal strike-box can further protect against forced entry.
Lastly, garage entry doors should be treated with the same level of security as other exterior doors. These often-overlooked points of entry are just as vulnerable and deserve equal attention.
Want it mounted at the right height the first time? We will quote the exact price on the phone before we come. Call (505) 347-2895
See our residential locksmith services.
Where the 34 to 48 Inch Rule Applies
The 34 to 48 inch rule comes from the 2010 ADA Standards: "Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground".[3] It covers doors on accessible routes in public accommodations and commercial facilities, and the IBC, IFC and NFPA 101 carry the same limits.[2]
A private home is different. The ADA rules for commercial facilities do not reach the part of a private home used only as a residence. When a business runs out of a home, the business part and the route into it are covered.[3]
Apartments and condos can be covered. Lori Greene's column opens with a reader whose accessibility inspector rejected the dead bolts on a multifamily residential project because of the mounting height.[2]
The exceptions are narrow. The ADA exempts doors "designed to be operated only by security personnel".[3] The International Building Code adds that "Locks used only for security purposes and not used for normal operation are permitted at any height," as quoted by Greene.[11] A front-door deadbolt you lock every night is normal operation.
Watch for two different 48s. The strike line is measured from the bottom of the frame.[2] The ADA limit is measured above the finish floor.[3] They are not the same line. A raised threshold or a thick floor sits between those two starting points, so measure operable parts from the floor you stand on.
In a private home, no code forces the 34 to 48 inch band, but it's still the right target: 48 inches is also the ADA's maximum high reach for an unobstructed forward reach.[3] Greene notes some state codes narrow the range further.[2] New Mexico's residential code adopts the 2021 IRC,[6] and your building department has the final word on a permit.
Keypad and Smart Deadbolts and the 48 Inch Limit
A keypad deadbolt set at the 48 inch strike line can break the 48 inch limit: its buttons sit above the bolt. Allegion's Lori Greene says the problem "is especially common when a deadbolt has a keypad or reader, as those components are typically in the top portion of the lock".[2] Measure the highest button, not the bolt.
The ADA counts every part you touch to work the lock. Greene lists "thumbturns, keypads" among the operable parts of door hardware.[2] That means the measurement that matters on a keypad deadbolt is the top button, not the bolt centerline on the template.
Not the bolt. The top button.
Use this sequence before you drill:
- Measure the knob or lever centerline from the finish floor.
- Hold the deadbolt's paper template at the spacing it calls for above the knob. Kwikset says about 5-1/2 inches;[8] Schlage's B-Series template says 4 inches.[9] Your keypad's own template wins.
- Hold the exterior keypad housing against the door at that mark.
- Measure from the finish floor to the highest button, the thumbturn and any lever.
- If any part reads above 48 inches, pick the lower spacing the template allows or a model whose keypad sits lower. Don't drill until every operable part reads 48 inches or less.
Fixing one that's already too high is harder. Greene warns that lowering a deadbolt can conflict with other lock preps, and care is needed to avoid warranty and listing issues.[2] For a step-by-step guide to installing a smart lock, see installing a smart lock.
How to Install a Deadbolt
To install a deadbolt, mark the height from the template, bore a 2-1/8 inch hole through the face of the door and a 1 inch hole into the edge at a 2-3/8 or 2-3/4 inch backset, fit the latch, then lay out the strike on a level line from the bore. Those dimensions come from Kwikset's and Schlage's own instructions.[10][9]
Installing a deadbolt correctly is crucial for improving your home's security. With the right tools and some patience, you can tackle this project yourself in just a few hours.
- Measure the door thickness and choose the backset: 2-3/8 or 2-3/4 inches.[8][9]
- Fold the template on the door edge with its centerline about 5-1/2 inches above the knob centerline on a Kwikset,[8] or 4 inches on a Schlage B-Series.[9] Check the 48 inch limit on every operable part.
- Bore the 2-1/8 inch face hole. Drill from one side until the point breaks through, then finish from the other side to prevent splintering.[10]
- Bore the 1 inch edge hole into the face hole.[10]
- Fit the latch and chisel a recess so the faceplate sits flush.
- Find the strike center: draw a level line from the center of the bore across the frame, then measure back from the door stop half the thickness of the door.[10]
- Drill the strike hole 1 inch across and 1 inch deep. On a four-hole strike, drill 3-inch-deep pilot holes for the screws closest to the jamb.[10]
- Install the exterior and interior parts, tighten every screw and test the bolt with the door closed.
Marking, Drilling, and Installing the Deadbolt
Start by gathering tools that are compatible with your door's material. Most deadbolt kits come with a paper template to guide your markings. Place the template at the recommended height specified in the installation guide. Mark the center of the deadbolt hole on the door's face and the latch hole on the door's edge.
Using a hole saw of the correct size, drill the main hole for the deadbolt. To avoid splintering, begin drilling from one side of the door and finish from the other side. For the latch hole, use a spade bit and drill straight until it meets the main hole.
Next, insert the latch assembly into the door edge. Trace around the latch plate and use a chisel to create a shallow recess so the plate sits flush with the door surface. Finally, follow the manufacturer’s instructions to install the exterior and interior components of the deadbolt. Ensure all screws are tightened securely, and test the mechanism to confirm it operates smoothly.
Strike Plate Alignment and Reinforcement
The strike plate plays a critical role in the deadbolt's effectiveness. For maximum security, the deadbolt must fit perfectly into the strike plate opening. Misalignment can weaken the door's protection.
To reinforce the door frame, remove any trim and attach a steel reinforcement strap. This helps distribute force more evenly across the frame.
Fill any gaps behind the strike plate with wood strips or putty to strengthen the frame. Make sure the strike plate hole is deep enough for the deadbolt to extend fully; Kwikset's instructions drill it 1 inch deep.[10]
When attaching the strike plate, use long screws that reach the framing behind the jamb. These longer screws provide better anchoring compared to the shorter ones often included in standard kits, making the door more resistant to forced entry.
If you notice any misalignment during testing, use chalk to mark the contact points on the deadbolt. Adjust the strike plate position as needed and fill old screw holes with wood filler. Once the filler dries, sand it smooth and drill new pilot holes for proper alignment.
DIY vs. Professional Installation
After installing the deadbolt and strike plate, you’ll need to decide whether to finish the project yourself or hire a professional.
If you’re comfortable with basic tools and instructions, a DIY installation is a manageable project that can be completed in a few hours. However, for those who prefer added peace of mind, hiring a professional locksmith might be the better option. Professionals bring specialized tools and expertise to handle various door materials and can identify potential security vulnerabilities that might go unnoticed.
For residents in the Albuquerque area, Roadrunner Lock and Key offers professional deadbolt installation and security consultations. Their 24/7 availability allows you to schedule a service that fits your needs, ensuring your deadbolt is installed with maximum effectiveness.
Common Deadbolt Placement Mistakes
The three common deadbolt placement mistakes are mounting it too high, drilling holes that don't line up with the strike, and anchoring the strike with short screws. Height is the one people miss: the strike line is about 48 inches up the frame,[1] while the operable parts must stay at or below 48 inches above the floor wherever accessibility rules apply.[3]
Getting the placement of a deadbolt wrong can compromise both security and ease of use.
Improper Height
The height of a deadbolt plays a crucial role in its effectiveness. The industry-standard deadbolt strike line is 48 inches from the bottom of the door frame.[2] This standard replaced the 60-inch height used before the ADA Standards and ICC A117.1 were adopted,[2] and aligns with modern accessibility requirements. According to these standards, all operable parts of door hardware need to be positioned between 34 and 48 inches above the floor.[3] However, placing the deadbolt at the upper limit of 48 inches can sometimes result in the thumbturn or cylinder exceeding the accessible operable height, which can make it difficult to use.
Double-check your measurements to ensure the deadbolt is both secure and user-friendly. Even small deviations can lead to operational problems or make the lock less accessible.
Misaligned Holes
Misaligned holes usually come from marking the strike by eye. Kwikset's method takes the guess out: draw a level line from the center of the bore hole across the frame, then measure back from the door stop half the thickness of the door to find the strike center.[10] If the bolt moves freely with the door open but drags with it closed, the strike is off; mark it with chalk and move the plate.
Inadequate Reinforcement and Short Screws
A strike plate held only by short screws is anchored in the jamb, not the wall framing. Use a heavy strike with long screws that reach the framing behind the jamb. Kwikset's own four-hole strike calls for 3-inch-deep pilot holes for the screws closest to the jamb.[10]
Additional Door Security Measures
Beyond the deadbolt, the upgrades that matter tie the strike and the hinges into the wall framing: a heavy strike plate on long screws, door jamb reinforcement, and a security bar for sliding doors. A deadbolt is only as strong as the frame it locks into, so reinforce the whole door, not just the lock.
Once you've nailed the proper placement and installation of a deadbolt, it's time to think about additional reinforcements to strengthen your entry points. While a deadbolt is a key piece of the puzzle, it’s only as strong as the frame and hardware supporting it. Reinforcing the entire door structure matters.
Reinforced Strike Plates and Door Jamb Armor
Reinforced strike plates make a real difference to door security. They work by spreading the force of a kick or other impact across a larger section of the door frame, making it much tougher to break through. Standard strike plates often fall short because they’re secured with short screws that barely penetrate beyond the trim. Upgrading to a heavy-gauge steel strike plate with four screw holes, set on long screws that reach the wall stud, is a simple upgrade that pairs well with a quality deadbolt.
Door jamb armor takes security a step further. These metal reinforcement kits are designed to strengthen the frame and hinge areas. They’re particularly useful for exterior doors, doors with existing frame damage, or homes in areas with higher burglary rates.
For even more security, consider adding a security bar or door brace. These devices anchor the door to the floor, making it significantly harder to force open. They’re especially effective for sliding doors or as temporary reinforcements while traveling.
| Security measure | What it reinforces | What to check |
|---|---|---|
| Graded deadbolt | The lock itself | The ANSI/BHMA grade on the package[4][5] |
| Reinforced strike plate | Where the bolt meets the frame | Four screw holes and long screws into the framing[10] |
| Door jamb armor | The jamb at the strike, and often the hinge side | That it fits your door and jamb profile |
| Locksmith evaluation | The whole opening | Height, alignment, screw length and frame condition |
Benefits of Professional Locksmith Services
While DIY upgrades can make a big difference, professional locksmith services offer peace of mind by ensuring everything is installed correctly. A skilled locksmith can spot vulnerabilities that might go unnoticed and address common installation errors.
For example, Roadrunner Lock and Key in Albuquerque installs everything from standard knob and lever locks to high-security deadbolts for homes and businesses. They also offer 24/7 emergency services, so whether you’re dealing with a break-in or just upgrading your security, help is always available.
An emerging trend in home security is the integration of smart deadbolts with reinforced hardware, installed by professionals. This combination offers both convenience and robust protection. Homeowners with non-standard doors or unique architectural designs often benefit from a comprehensive locksmith evaluation to tailor solutions to their specific needs.
Asked "How much will it cost?" on the Roadrunner Lock and Key homepage, the shop answers: "It depends on the job, the vehicle or the lock, and where you are. Call and tell us what happened, and we will quote the exact price on the phone before we come. You decide before anyone gets in the van."
For the best results, layer multiple security measures. Regularly inspecting and maintaining your door hardware, combined with periodic security assessments, ensures your door remains a strong barrier against unauthorized entry.
Key Points About Deadbolt Placement
Getting the placement of a deadbolt just right is all about balancing security, ease of use, and compliance with building regulations. Generally, deadbolts are positioned a few inches above the doorknob: about 5-1/2 inches on Kwikset's template[8] and 4 inches on Schlage's B-Series template.[9]
When it comes to accessibility, the Americans with Disabilities Act (ADA) sets clear guidelines. According to the ADA, door hardware, including deadbolts, should be installed between 34 and 48 inches above the floor on the doors it covers.[3] To meet these requirements, you’ll need to ensure both the lock cylinder and thumbturn are within this height range. This accessibility standard ties in with broader installation practices to create a user-friendly and compliant setup.
The Steel Door Institute recommends a standard height of 48 inches from the bottom of the door frame to the centerline of the strike plate.[1][2] This guideline ensures uniformity and security across various applications. It complements earlier recommendations for precise deadbolt placement, reinforcing consistency in installation.
For homeowners and businesses in Albuquerque, professional services can make all the difference. Roadrunner Lock and Key installs deadbolts across the Albuquerque area. With proper installation, even the most robust deadbolt can perform at its best, offering maximum protection.
FAQs
No question matches that. Call or text (505) 347-2895 and ask it.
Roadrunner Lock and KeyAnswers from the shop
Open 24/7
Pick a question, or search above. You get the straight answer, the way we would give it on the phone.
What should I consider when deciding between single-cylinder, double-cylinder, and keyless deadbolts for my home?
When choosing a deadbolt, it’s important to weigh your security needs, door features, and the level of convenience you want. Here’s a quick breakdown of your options:
- Single-cylinder deadbolts: These are the go-to choice for many homeowners. They feature a keyhole on the outside and a thumb turn on the inside, making them simple to use. They’re best for doors without nearby windows, as windows could allow someone to reach in and unlock the door.
- Double-cylinder deadbolts: With a keyhole on both sides, these provide an added layer of security since they can’t be opened without a key, even from the inside. However, they might be less practical in emergencies, as they require a key to unlock from both sides.
- Keyless deadbolts: Perfect for those who value convenience, these modern locks use keypads or biometric entry systems. They’re especially handy for doors that are used frequently, eliminating the need for traditional keys.
When deciding, consider the door’s location, how secure it needs to be, and how often it’s in use. For exterior doors, focus on finding a balance between strong security and ease of use for everyone in your household.
Roadrunner Lock and Key
What is the ANSI/BHMA grading system for deadbolts, and which grade is best for home security?
The ANSI/BHMA grading system evaluates deadbolts based on three key factors: durability, strength, and security. Deadbolts are classified into one of three grades: Grade 1, Grade 2, or Grade 3.
- Grade 1: This is the top tier, providing the highest level of security and durability. It's an excellent choice for residential use, particularly when safety is a primary concern.
- Grade 2: A reliable middle ground, offering a good mix of security and affordability, making it suitable for most homes.
- Grade 3: The basic standard, offering the least amount of protection.
For optimal home security, Grade 1 deadbolts are highly recommended, especially for entry doors or areas that need extra reinforcement.
Roadrunner Lock and Key
What mistakes should I avoid when installing a deadbolt to maximize security?
To get the most out of your deadbolt and ensure your home stays secure, steer clear of these common pitfalls:
- Misaligned deadbolt and strike plate: When the deadbolt doesn’t line up perfectly with the strike plate, the lock’s strength is compromised, making it less effective.
- Using short or flimsy screws: Always opt for long, sturdy screws, at least 3 inches in length, that anchor deeply into the door frame and wall stud. This adds serious stability to your lock.
- Ignoring door frame reinforcement: A weak door frame can be an easy target for forced entry. Reinforce it with a heavy-duty strike plate and additional hardware to bolster its strength.
For optimal security, make sure the deadbolt sits flush against the door surface and that every component is tightly secured. A proper installation goes a long way in protecting your home.
Roadrunner Lock and Key
How high should a deadbolt be?
Most deadbolts sit with the strike centerline about 48 inches up from the bottom of the door frame, which is where the Steel Door Institute's hardware drawing puts the deadlock strike. On doors covered by the ADA, every operable part of the lock, including the thumbturn and any keypad, must sit between 34 and 48 inches above the finish floor. In a private home the ADA does not apply to the living space, but the same range is a sound target. Measure the highest button on a keypad model before you drill.
Roadrunner Lock and Key
Where should a deadbolt be placed?
Place the deadbolt above the knob or lever, on the same door edge, at the spacing the deadbolt's template calls for. Kwikset's drilling instructions say about 5-1/2 inches between the knob centerline and the deadbolt centerline, and Schlage's B-Series template says 4 inches. On a knob mounted 38 to 42 inches up, that puts the deadbolt between 42 and 47-1/2 inches. Put one on every exterior door, including the door from the garage into the house, and anchor its strike with long screws that reach the framing.
Roadrunner Lock and Key
What is the standard height for installing a door lock?
On the Steel Door Institute's hardware location drawing, the lock strike (the knob or lever latch) sits 38 to 42 inches up and the deadlock strike sits at 48 inches, "or as required by local code." Accessibility rules then cap every operable part at 48 inches and set a 34 inch minimum above the finish floor on the doors they cover. Kwikset's and Schlage's templates then set the deadbolt 4 to about 5-1/2 inches above the knob. If you are replacing a lock and the existing holes are in range, reuse them.
Roadrunner Lock and Key
6 questions
Mark It, Measure It, Then Drill
Get the height right before the drill touches the door. Mark the knob centerline, set the deadbolt at the spacing its template calls for, and measure the highest operable part from the floor you stand on. If it reads 48 inches or less, drill. If a keypad pushes past 48, drop to the lower spacing or pick a lower-profile model before you make a hole you can't take back.
Then spend your effort on the strike. A well-placed deadbolt still fails if the strike plate hangs on short screws in a soft jamb. Still choosing the lock itself? Compare a deadbolt vs knob lock first.
Not sure about your door? Text a photo of your door edge and the existing hardware to Roadrunner Lock and Key, or call (505) 347-2895. We're at 3803 3rd St NW in Albuquerque, open 24/7, and we will quote the exact price on the phone before we come. Save the number in your phone now so it's there when a lock starts sticking.
References
- Steel Door Institute. SDI 111, Recommended Details for Standard Steel Doors, Frames, and Accessories: Hardware Locations (SDI 111A-24). 2025 edition; section 111A-24 dated 2024. Read October 14, 2026. steeldoor.org/wp-content/uploads/2020/02/SDI_111.pdf
- Lori Greene, I Dig Hardware (Allegion). Decoded: Dead Bolt Mounting Height. July 2, 2026. Read October 14, 2026. idighardware.com/2026/07/decoded-dead-bolt-mounting-height/
- U.S. Access Board. 2010 ADA Standards for Accessible Design: 309.4 Operation; 308.2.1 Unobstructed forward reach; 404.1 General; 404.2.7 Door and Gate Hardware; 28 CFR 36.401(b) Commercial facilities located in private residences. 2010 Standards. Read October 14, 2026. access-board.gov/ada/
- Builders Hardware Manufacturers Association (BHMA). Product Grade Levels. No page date shown. Read October 14, 2026. buildershardware.com/ANSI-BHMA-Standards/Product-Grade-Levels
- Builders Hardware Manufacturers Association (BHMA). ANSI/BHMA A156.40 Residential Deadbolts. Page dated April 1, 2019; standard approved January 15, 2015. Read October 14, 2026. buildershardware.com/Home-Sweet-Secure-Home/ansibhma-a15640-residential-deadbolts
- New Mexico State Records Center and Archives. 14.7.3 NMAC, 2021 New Mexico Residential Building Code (adopts the 2021 International Residential Code). Effective July 14, 2023. Read October 14, 2026. srca.nm.gov/parts/title14/14.007.0003.html
- International Code Council. 2021 International Residential Code, Section R311.2 Egress Door. 2021. Read October 14, 2026. codes.iccsafe.org/content/IRC2021P2/chapter-3-building-planning The ICC page renders the code text by script, so the text was read on the New Mexico 2021 IRC reproduction at up.codes/viewer/new_mexico/irc-2021/chapter/3/building-planning
- Kwikset. Single-Sided Deadbolt Drilling Instructions, 60687 / 01. 2014. Read October 14, 2026. images.kwikset.com/is/content/BDHHI/drilling-instructions_single-sided deadbolts
- Schlage (Allegion). B-Series 2-3/8 or 2-3/4 Backset Installation Template, P513-594. 1996. Read October 14, 2026. us.allegion.com (Schlage B-Series installation template PDF)
- Kwikset (Spectrum Brands). Deadbolt Drilling Instructions, 60719 / 01. 2014. Kwikset's PDF, hosted by a retailer. Read October 14, 2026. doorhardwarecenter.com/files/docs/DrillingInstructions_24342.pdf
- Lori Greene, I Dig Hardware (Allegion). Decoded: Locks Used Only for Security Purposes. May 9, 2019. Read October 14, 2026. idighardware.com/2019/05/locks-used-only-for-security-purposes/