Roadrunner Lock and Key
A brass lock cylinder on a dark slate slab beside three silver keys on a ring, with a red key tag behind and two worn key tags out of focus at the left

Emergency Services30 min read

Master Key System Risks and How to Fix Each One

By Roadrunner Lock and Key ·

Master key system risks come down to four failures: a lost or stolen master key, unauthorized copies, a keyway patent that expires so blanks escape control, and rights amplification, where one ordinary change key is worked into a master. Security researcher Matt Blaze showed that one master-keyed lock, its own key, a few blank keys and a metal file are enough to make a working master.[1]

A master key opens every lock in its system. A change key opens only its own door. That convenience is the risk. What most master key guides leave out is how the copying risk works and when it starts. Blaze's 2003 paper explains how a change key leaks the master.[1] And a U.S. utility patent ends 20 years after filing,[2] which is when a patented keyway stops giving legal control over blanks.[3] Poor key control, careless storage and worn hardware are how those four failures get their chance. Below is the fix for each one, plus a table for choosing between rekeying, a restricted keyway and access control.

Master key systems simplify access management but come with risks that can compromise security. Key issues include unauthorized duplication, lost or stolen master keys, poor key control, improper storage, and outdated locks. Each of these problems can lead to breaches, financial losses, and operational disruptions. Here's how you can address them:

  • Prevent Key Duplication: Use restricted keyways and patented systems to control who can copy keys.
  • Respond to Lost Keys: Rekey locks immediately and implement tracking systems.[4]
  • Improve Key Control: Keep detailed logs, conduct audits, and limit master key distribution.
  • Secure Key Storage: Use lockboxes or electronic systems to protect keys from theft or mishandling.
  • Upgrade Locks: Replace outdated or low-quality hardware with high-security options.

Quick action and proper planning can minimize risks and ensure your master key system remains secure.

Unauthorized Key Duplication

Unauthorized key duplication means someone copies a master or sub-master key without approval. It is the quiet risk, because a copy leaves no mark on the lock. On a standard keyway anyone with the key can get it copied; on a restricted, patented keyway, blanks come only through the authorized channel, but only while the patent is in force.[2][3]

One of the most serious risks in master key systems is unauthorized key duplication. This happens when someone makes unapproved copies of master or sub-master keys, creating security gaps that often go unnoticed until there's a breach.

What Causes Unauthorized Key Duplication

A major factor behind unauthorized duplication is the use of non-restricted keyways. These standard key profiles can be easily copied at most hardware stores or by locksmiths without needing proof of authorization. With access to a key, anyone could simply walk into a store and request a duplicate.

Master key systems face an added risk from something called rights amplification. Essentially, one ordinary change key and access to its lock can be used to work out and cut a working master key with a few blank keys and a metal file,[1] potentially granting access to the entire system. What makes this even more concerning is that unauthorized duplication often leaves no visible signs, meaning property owners might only discover the issue after a theft or security breach.

Another weak spot arises when patents on older master key systems expire. Once a patent's term ends, the patent no longer gives its owner the right to exclude others from making the blanks,[3] so unauthorized copies get easier to make without the property owner's knowledge.

Given these risks, taking proactive steps to secure your system is critical.

When a Keyway Patent Expires

A U.S. utility patent filed on or after June 8, 1995 runs from the day it issues until 20 years after its U.S. filing date (for a continuation or divisional, 20 years after the earliest application it claims).[2] Two things move that date: the term is "Subject to the payment of fees under this title", so the patent runs its full term only if its fees are paid,[3] and a term adjustment for USPTO delays can add time.[2] While it runs, the patent grants "the right to exclude others from making, using, offering for sale, or selling the invention".[3] That right is what keeps blanks for a patented keyway inside the dealer channel. When the term ends, the legal barrier ends with it.

Timeline of a U.S. utility patent: protection starts at issue and ends 20 years after the filing date Timeline for a U.S. utility patent on an application filed on or after June 8, 1995. The application is filed in the United States. The patent issues later, and the right to exclude others from making, using, offering for sale, or selling the invention starts then. The term ends 20 years from the U.S. filing date. The term is subject to the payment of fees, and a term adjustment for USPTO delays can add time. Not to scale. Sources: USPTO MPEP 2701 and 35 U.S.C. 154. U.S. utility patent term Applications filed on or after June 8, 1995 Filed in the U.S. Patent issues Term ends Right to exclude others Filing date 20 years from filing Subject to the payment of fees USPTO delay adjustment can add time Not to scale. Sources: USPTO MPEP 2701; 35 U.S.C. 154
Blank control on a patented keyway ends with the patent. Ask for the filing date.

So ask one question before you buy a restricted system: when was the keyway's patent filed? A keyway patent filed 15 years ago has about five years of its 20-year term left.[2] Blaze also noted that judging patent-based key control means weighing "the likelihood of the continued validity and enforcement of the patents".[1]

How to Prevent Unauthorized Duplication

There are several effective ways to reduce the risk of unauthorized key duplication.

One of the best defenses is switching to restricted or patented keyways. These systems use specialized key blanks that aren't available to the general public. Legitimate copies are made only by authorized dealers, and often require a security card or an authorization code to proceed.

Keyway TypeDuplication RiskBlank AvailabilityControl Level
Non-restrictedHighWidely available at hardware storesNone
Restricted/PatentedLower while the patent is in force;[2] blanks can still be milled or cast[1]Only through authorized dealersStrict authorization required

Another layer of security comes from key serialization. Each key is given a unique serial number, and detailed records are maintained to track who has access to each one.

Working with professional locksmiths can also help secure your system.

Organizations should also enforce strict key control policies. This includes keeping detailed logs of key distribution, requiring written approval for any duplications, and conducting regular audits to ensure all keys are accounted for. When employees leave, it's crucial to retrieve their keys immediately.

For a more modern approach, electronic key control systems can eliminate the risk of physical duplication altogether. These systems let property managers grant or revoke access remotely, while also providing real-time tracking and alerts whenever credentials are used.

Lost or Stolen Master Keys

If a master key is lost or stolen, treat every lock it opens as unlocked until those locks are rekeyed or re-cored. Federal policy at the U.S. Fish and Wildlife Service is blunt: when keys are reported lost or stolen, the security officer "must ensure they are deactivated and the locks changed".[4] Blaze reached the same answer: "Every mastered lock must be rekeyed".[1]

When a master key goes missing, it's not just an inconvenience, it's a full-blown security risk. Unlike a single-use key that only opens one door, a lost master key can compromise your entire system in a heartbeat.

Why Lost or Stolen Keys Are a Serious Threat

A missing master key doesn't just unlock one door, it potentially grants access to multiple entry points. The risk becomes even greater if the key has identifying information, like a tag or engraving, which could lead an intruder straight to your property.

The financial toll can be massive. For instance, in February 2022, Hawaii state lawmakers said they were spending $250,000 to rekey the office doors of all 25 senators and 51 House members, because master keys had gone missing and House members had no idea how many had been given out.[5] That's not just a big expense, it's a logistical nightmare.

Replacing a lost master key often means rekeying or replacing every lock it could access.[1] Depending on your organization's policies, this could also trigger mandatory reporting, security audits, or even a complete overhaul of your key management system.

Steps to Take When a Master Key Goes Missing

Time is critical when a master key is lost or stolen. Start by confirming whether the key is truly missing. Check with the last person who had it, search common areas, and retrace recent activities. If it's not quickly recovered, treat the situation as a security emergency.

Next, figure out which locks the key can access and secure those entry points immediately. Keeping detailed records of your master key system is vital for identifying which areas are at risk.

Notify all relevant parties, such as tenants, supervisors, and security teams, right away. Fish and Wildlife Service policy, for one, requires key holders to report a lost key immediately.[4] Document these communications to maintain a clear record of your response. Then, call a professional locksmith. For example, Roadrunner Lock and Key in Albuquerque, NM, provides 24/7 emergency services and can rekey locks or upgrade your security.

To speed up future recovery efforts, consider installing interchangeable core (IC) systems. These allow you to replace lock cores without dismantling the entire lock, saving both time and money.[6] Additionally, electronic key management systems can give you real-time tracking and control, helping you respond faster to similar incidents down the line.

Finally, be proactive by creating a recovery plan before an emergency strikes. This plan should outline the steps to take when a master key is lost, specify who to contact, and detail how to restore security efficiently. Having a plan in place ensures no critical steps are missed during a crisis.

Audit or rekey your master key system. Tell us how many doors the lost key opens, and we will quote the exact price on the phone before we come. Call (505) 347-2895

Building managers can start with our locksmith for facility managers page.

Rights Amplification: One Key Becomes Every Key

Rights amplification means turning the access you were given into more access than you were given. In a master key system, it means someone holding one ordinary change key works out the master key. In a 2003 paper, Matt Blaze showed that a single master-keyed lock and its key, a small number of blank keys and a metal file are enough, with no suspicious behavior at the lock.[1]

Most master-keyed pin tumbler locks are built so two different keys turn them: the change key for that door and the master for the whole system. That shared design makes master keying convenient. Blaze's point is that it also leaks the master to anyone who already holds a change key.[1] The attacker needs no special skill, uses only a lock he or she is allowed to use, and can spread the work over several sessions.[1] Blaze wrote that the attack "leaves essentially no forensic evidence".[1] Looking at the lock will not tell you it happened. No damage. No trace.

That changes how a building manager should think about every key handed to a tenant, a contractor or a departing employee. A change key is not just one door. On a conventional master system, it is a possible path to the master.

The fixes are design choices, not habits:

  • Lock designs that resist the attack. Blaze names master rings, bicentric cylinders and positional dimple key systems as designs that resist it "intrinsically".[1]
  • A restricted keyway. It can make blanks harder to get, but Blaze warned that blanks for many so-called restricted systems may be available from aftermarket vendors, and that a different key can often be milled down to fit.[1]
  • Fewer masters, or none. Blaze's advice to owners is to "consider carefully whether the security risks of mastering outweigh its convenience benefits".[1]
  • Access control on the doors that matter most. A card or code has no pin stack to decode, and a lost credential is switched off instead of rekeyed.[4]

That is the honest trade. Every master key is convenience bought with exposure.

Poor Key Control and Access Management

Poor key control means nobody can say who holds which key. The federal standard is a written record: the U.S. Fish and Wildlife Service requires an inventory of keys, locks and locking devices at least annually and keeps that written record for 5 years, and it keeps building master keys to "the absolute minimum".[4] Without that record, a lost key cannot be scoped.

When master key systems lack proper oversight, the risks can be severe. Poor key control isn't just about a few misplaced keys, it often stems from weak policies, unclear access levels, and insufficient tracking. These gaps can leave an entire security system exposed, creating vulnerabilities that demand immediate attention.

Problems with Poor Key Control

Without clear policies or accountability, the costs of poor key control can skyrocket. For example, after a lost set of master keys was never recovered, the College of William and Mary re-cored about 3,000 residence hall cores for almost $400,000 and added 20 electronic master key storage boxes, for a total of more than $560,000.[7] Beyond financial losses, internal misuse can also wreak havoc. In Greenwich, Connecticut, a former apartment complex manager used a master key from January 2009 to September 2010 to get into apartments and steal jewelry and other items, and pleaded guilty to eight counts of third-degree burglary and five counts of first-degree larceny.[8]

The effects go beyond security. Poor key control can harm productivity, with employees wasting time searching for misplaced keys instead of focusing on their work. Add to that the lack of proper documentation, which weakens accountability and leaves the system open to further misuse.

How to Improve Key Control

To address these risks, it's essential to implement strong key control measures. Start by creating a tiered access structure. For instance:

  • Individual keys should only unlock specific doors.
  • Sub-master keys can control grouped doors.
  • Grand master keys should be strictly limited to essential personnel.

The Fish and Wildlife Service draws that line in writing: master keys should go only to security, maintenance personnel and people who need many areas for emergencies.[4]

Diagram of a master key hierarchy: one grand master key above master keys, each above change keys for single doors Three levels of keys. At the top, one grand master key opens every group in the system. Below it, two master keys each open one group of locks, such as a suite or a floor. Below each master key, two change keys each open one lock or a small set keyed alike. Each level opens everything below it. Grand master key Every group in the system Master key One group, such as a floor Master key One group, such as a suite Change key One lock Change key One lock Change key One lock Change key One lock
Each level opens everything below it. Lose a key high in the tree and every door under it needs rekeying.

Standardized protocols for issuing keys are equally important. A centralized key log can assign unique identifiers to every key and track all transactions, ensuring a reliable audit trail. Role-based access controls are another critical step, limiting employees to only the keys necessary for their duties, which reduces unnecessary exposure to risk.

Regular audits are also key. These checks should reconcile physical inventories with key logs to catch discrepancies early and prevent breaches. Training programs can help ensure all key holders understand their responsibilities, while clear agreements outline expectations, reporting procedures for lost keys, and potential consequences for negligence.

Another effective strategy is investing in a patented key control system. These systems often include restricted keyways, which make unauthorized duplication harder by requiring authorized dealers for key copies. This adds an extra layer of security to your master key system.

For example, California's Napa Valley Unified School District replaced its key system with a restricted, patented keyway, using Schlage Primus blanks, and its locksmith said, "One reason we are using the Primus is to stop unauthorized key copying".[9]

Treat key management as a priority, not an afterthought. By doing so, you can protect assets, maintain accountability, and strengthen the overall security of your master key system.

Improper Key Storage and Handling

Improper key storage means keys sit where anyone passing can take them: a front-desk drawer, a pegboard, a car. Federal policy at the U.S. Fish and Wildlife Service bans it in plain words: key holders "must not store keys issued to them in unlocked desk drawers or other unsecured areas".[4] Store master keys locked, logged and out of sight.

Just like unauthorized duplication or weak key control, improper storage can jeopardize the security of a master key system. Even the best key policies fall apart when storage practices are careless, opening the door to breaches, theft, and other safety concerns. To keep your master key system secure, strict storage protocols are essential.

Key Storage Risks

Poor storage practices create serious vulnerabilities. For instance, leaving keys in easily accessible spots, such as front-desk drawers or hanging on pegboards, makes them an easy target for unauthorized access. A moment of negligence can compromise an entire master key system in seconds.

The problem isn't just theft, it's also human error. Manual processes can lead to mistakes that put keys at risk. One striking example occurred in August 2008 at the Curry County jail in Clovis, New Mexico, where eight inmates escaped; an investigator's report found the most likely explanation was that an inmate took a key left hanging in a door lock during plumbing work and returned it before anyone noticed.[10]

Safe Key Storage Methods

To combat these risks, you need a structured and secure approach to key storage. Start by securing all keys in a lockbox or an electronic key control system. Avoid leaving keys in open or easily accessible areas.

Consider storing keys in locked cabinets, a dedicated key room, or an electronic system that only authorized personnel can access. Use clear labeling and categorization to make it easy to locate keys, but avoid obvious labels that reveal their purpose. Instead, implement coded systems that only trained staff can understand.

Accountability is key. Maintain a detailed log for every key issued, noting who has it, what areas it grants access to, and when it's expected back. This tracking system ensures transparency and helps prevent misplacement.

Minimize manual handling to reduce the chance of errors or lost keys. For GSA-approved padlocks and their keys, the Fish and Wildlife Service takes inventory twice a year.[4] Regularly audit your key storage area to verify that all keys are accounted for and that protocols are being followed. These audits can help you identify missing keys before they lead to larger problems.

Have a clear plan in place for lost or misplaced keys. This should include immediate steps to secure affected areas and limit potential damage. A well-prepared response can prevent small issues from escalating into major security breaches.

Finally, train your staff on the organization's key control policies. Regular training sessions ensure that everyone understands their role in protecting the system and follows the established procedures. Proper training is the backbone of effective key management and helps maintain a secure storage system.

Low-Quality or Outdated Lock Hardware

Low-quality or outdated lock hardware undoes good key control, because a lock that can be kicked, drilled or pried open makes the key irrelevant. Many ANSI/BHMA standards grade hardware 1, 2 or 3, with grade 1 the highest.[11] On doors with wooden jambs, Seattle Police say "The weakest point is almost always the strike plate that holds the latch or lock bolt in place".[12]

Your master key system's security hinges on its weakest link. Even the best key control can't compensate for vulnerabilities in outdated or low-quality locks. As the first line of defense, locks play a crucial role in keeping unauthorized individuals out, making their quality a key factor in your overall security.

Issues with Low-Quality Hardware

While key control and secure storage are essential, the quality of your hardware is what ultimately holds everything together. Older locks often have worn-out keyways and pins, making them easier to pick or manipulate over time. These weaknesses can create unnoticed security gaps until they are exploited. Put simply: hardware keeps people out, but key control lets the right people in and tells you who they are.

Low-quality locks are also more susceptible to forced entry. In Consumer Reports deadbolt tests reported by WRAL in June 2011, most of the locks tested could be defeated with a few hard kicks or by using a cordless drill in the right spot, and weak strike plates were a significant problem.[13] Those are 2011 models, so treat the result as a warning about the type of failure, not a rating of today's locks. This risk is amplified in master key systems, where compromising a single lock could grant access to multiple areas.

Lock quality isn't just about durability, it's about meeting established security standards. Many ANSI/BHMA standards define product grades 1, 2 and 3, with grade 1 the highest, set by progressive levels of performance benchmarks.[11] The Builders Hardware Manufacturers Association (BHMA) writes those standards.

Another challenge is technological obsolescence. Older access control systems often can't integrate with newer technologies, such as advanced surveillance systems or modern encryption methods. Frequent malfunctions and the lack of manufacturer support are clear indicators that an upgrade is overdue.

Upgrading to Better Lock Hardware

Start by conducting a thorough security assessment to determine whether you should rekey or replace your locks. Rekeying is often a cost-effective option, but replacing locks can provide a higher level of protection for businesses looking to enhance security.

Investing in high-quality locks from trusted brands like Schlage, Yale, Mul-T-Lock, or SARGENT offers better protection and durability. Choose locks with an ANSI/BHMA grade; grade 1 is the highest.[11] For added protection, high-security key systems like those from Medeco or Mul-T-Lock can make unauthorized key duplication harder.

When selecting new locks, ensure they fit your specific door requirements. For example, the backset should align perfectly with the door frame. Upgrading supporting components, like replacing standard strike plates with reinforced ones secured by 3-inch to 4-inch wood screws into the doorframe stud,[12] can significantly improve resistance to forced entry. A lock should be secure without the owner having to buy an aftermarket part, but most strike plates need that upgrade.

Regular inspections of your locks and access control systems are vital to maintaining security. Check for wear and tear, especially on less frequently used doors, and consider installing heavy-duty locking hardware where needed. Also evaluate your access control system's compatibility with modern technology to ensure it continues to meet your security needs.

A building is only as secure as its weakest lock.

Upgrading your lock hardware is more than just replacing old components, it's about building a solid security foundation for your master key system. If you're in Albuquerque, NM, and need expert advice or professional upgrades, reach out to Roadrunner Lock and Key for reliable assistance.

Master Key vs Restricted Keyway vs Access Control

A conventional master key system needs no special blanks or readers, but it is the easiest to compromise. A restricted, patented keyway adds legal control over blanks while the patent lasts.[2] Interchangeable cores make rekeying a swap instead of a teardown.[6] Electronic access control removes the key entirely, so a lost credential is switched off rather than rekeyed.[4]

OptionWhat it stopsWhat it does not stopWhen a key or credential is lostMain cost driversBest fit
Conventional master key system (open keyway)Key-ring sprawl; one key for staff who need many doorsCopies at any key counter; rights amplification[1]Rekey every lock the lost key opens[1]Number of cylinders to rekeySmall buildings with few key holders and low turnover
Master key system on a restricted, patented keywayCopies outside the authorized channel while the patent runs[2][3]Rights amplification on conventional pin stacks;[1] aftermarket, milled or cast blanks[1]Rekey every lock the lost key opens[1]Restricted blanks, cylinders, new keysBuildings that keep mechanical keys and worry most about copies
Interchangeable-core (IC) master systemLong rekey jobs: a control key removes the core so a new one drops in[6]Copies on an open keyway; rights amplification on conventional pin stacks[1]Swap cores on the affected doors[6]Spare cores, control key securityCampuses and multi-tenant buildings that rekey often
Electronic access control (cards, fobs, codes)Rekeying for a lost credential, which is deactivated instead;[4] there is no metal key to copyForced entry on weak doors and frames[12]Deactivate the credential[4]Reader hardware per door, wiring, softwareHigh-turnover doors: main entries, suites, rooms with sensitive records

If staff and contractors turn over often, choose access control for those doors, because a lost card is switched off instead of triggering a rekey.[4]

If you must keep mechanical keys and copying is your worry, choose a restricted keyway, because blanks stay in the dealer channel while the patent runs;[2] check the patent's filing date first.

If you rekey often but cannot wire the doors, choose interchangeable cores, because a control key swaps the core without taking the lock apart.[6]

Risk and Solution Comparison Table

A risk-to-fix table pairs each way a master key system fails with the fix that closes it. Seven risks belong on it for any master-keyed building: unauthorized copies, a lost or stolen master, poor key control, careless storage, weak hardware, an expired keyway patent, and rights amplification, where one change key yields the master.[1] Each fix below names its source.

When you break down the risks tied to key management, the financial stakes become glaringly clear: documented rekeys have run from $250,000 for 76 legislative offices in Hawaii[5] to more than $560,000 for one college's residence halls.[7]

Risk-to-fix matrix for master key systems: seven risks, from lost master keys to rights amplification, each paired with its fix Seven master key system risks and the primary fix for each. Unauthorized key duplication: restricted keyways, patented key control systems. Lost or stolen master keys: immediate rekeying, key tracking logs, limited master key distribution. Poor key control and access management: detailed record-keeping, regular audits, strict issuance policies. Improper key storage and handling: secure key cabinets, electronic tracking systems, controlled access points. Low-quality or outdated lock hardware: high-security cylinders, regular hardware inspections. Expired keyway patent: check the filing date; plan a keyway change before the term ends. Rights amplification: attack-resistant lock designs, fewer masters, access control on key doors. Risk Fix Unauthorized Key Duplication Restricted keyways, patented key control systems Lost or Stolen Master Keys Immediate rekeying, key tracking logs, limited master key distribution Poor Key Control and Access Management Detailed record-keeping, regular audits, strict issuance policies Improper Key Storage and Handling Secure key cabinets, electronic tracking systems, controlled access points Low-Quality or Outdated Lock Hardware High-security cylinders, regular hardware inspections Expired Keyway Patent Check the filing date; plan a keyway change before the term ends Rights Amplification Attack-resistant lock designs, fewer masters, access control on key doors
Seven ways a master key system fails and the fix for each. Sources in the References.
RiskPotential ConsequencesPrimary SolutionsSource for the fix
Unauthorized Key DuplicationSecurity breaches due to unrestricted accessRestricted keyways, patented key control systemsPatent term[2][3]
Lost or Stolen Master KeysFull system compromise, emergency lockouts, rekeying every lock the master opens[1] (more than $560,000 at William and Mary[7])Immediate rekeying, key tracking logs, limited master key distributionFWS 432 FW 3;[4] Blaze (2003)[1]
Poor Key Control and Access ManagementSecurity lapses, unknown key whereabouts, lack of accountabilityDetailed record-keeping, regular audits, strict issuance policiesFWS 432 FW 3[4]
Improper Key Storage and HandlingIncreased risk of theft, damaged keys, unauthorized borrowingSecure key cabinets, electronic tracking systems, controlled access pointsFWS 432 FW 3[4]
Low-Quality or Outdated Lock HardwareVulnerability to picking, forced entry, and wearHigh-security cylinders, regular hardware inspectionsBHMA grade levels;[11] Seattle Police door security[12]
Expired Keyway PatentBlanks for your keyway can be made by othersCheck the filing date; plan a keyway change before the term endsPatent term[2][3]
Rights AmplificationA change key holder derives the master with no trace at the lock[1]Attack-resistant lock designs, fewer masters, access control on key doorsBlaze (2003)[1]

The financial impact of these risks depends heavily on how quickly they're addressed. Hawaii lawmakers chose to rekey after House members said they had no idea how many master keys had been given out.[5]

Some risks demand immediate attention, like a stolen master key, while others, such as poor key control, can often be addressed over time. Delaying action on a lost master key leaves every old lock exposed until the rekey is done.[1]

Even with strong key control measures, outdated hardware can undermine security. Worn locks get easier to pick or force open, which reduces the effectiveness of even the best policies.

Real-world examples drive home the importance of strong strategies. Take the Greenwich, Connecticut case, where a former apartment complex manager used a master key for about 20 months to steal from residents.[8] Poor key control and weak oversight allowed the thefts to continue, showing how compounded risks can lead to significant losses.

To prevent such scenarios, Albuquerque property managers and business owners can rely on Roadrunner Lock and Key. Their expertise helps identify risks and implement effective solutions before small issues spiral into costly emergencies.

Fixing a Compromised System

Fixing a compromised master key system means rekeying or re-coring from the top of the hierarchy down, then fixing whatever let the key get away. Blaze's rule for a compromised master is that "Every mastered lock must be rekeyed".[1] Federal policy adds the trigger list: rekey when key accountability is compromised, when lost-key requests reach 25 percent of issued keys, or when a vacated facility's keys are not recovered.[4]

  1. Name what is missing. Which key (change, sub-master, master or the IC control key) and which doors it opens. Your key records answer this. The Fish and Wildlife Service requires a list that includes lock locations and the number of keys kept for each lock.[4] Without records, assume the whole system.
  2. Secure the highest-risk doors first. Exterior entries, server and records rooms, and anything with cash or medication.
  3. Report it in writing. Fish and Wildlife Service key holders must report lost or stolen keys immediately;[4] give your own staff the same rule.
  4. Set the scope. A lost master means every lock under it.[1] A lost change key on a conventional system can still lead to the master,[1] so weigh rekeying the master level too.
  5. Rekey or re-core from the top down. New master and change bittings, or new IC cores swapped with the control key.[6]
  6. Fix the cause. Restricted keyway with a known patent date,[2] attack-resistant lock designs,[1] or access control on high-turnover doors.[4]
  7. Restart the key log. Sign keys out on a register, inventory at least once a year and keep the records 5 years.[4]

What does it cost? The documented jobs give a feel for scale. William and Mary's cost to replace about 3,000 cores was put at almost $400,000,[7] which works out to less than $134 per core. Hawaii's $250,000 was for the office doors of 76 legislators,[5] about $3,290 per office. Neither is an Albuquerque price. The real drivers are the number of cylinders, the keyway, cores and any reader hardware.

For help on commercial doors, see our commercial locksmith services, and for rentals, our guide to rekeying locks between tenants.

Conclusion

Master key systems come with their fair share of challenges, unauthorized key duplication, misplaced keys, lack of proper control, insecure storage, and outdated hardware. However, these risks can be significantly reduced with a well-thought-out strategy. Using restricted keyways, enforcing strict control policies, ensuring secure storage, and committing to regular upgrades are essential steps to keep your property safe and simplify key management.

To truly enhance security, professional installation and ongoing maintenance are crucial. These tailored systems not only safeguard your property but also help cut long-term costs while offering better control than traditional locking mechanisms. A system lasts as long as it was planned carefully and maintained rigorously; skip the key management policy and the security goes with it.

For property managers and business owners in Albuquerque, Roadrunner Lock and Key provides expert solutions to design, implement, and maintain master key systems customized to your needs. With 24/7 availability, they're ready to handle emergencies like rekeying after a lost master key or updating outdated hardware.

Matt Blaze's advice from 2003 still fits: weigh whether the security risks of mastering outweigh its convenience.[1] Don't wait for a security breach to act. Taking proactive measures now ensures your property stays protected, reduces costs in the long run, and gives you peace of mind with a well-managed access control system tailored to meet your needs.

Send us your door count. Call or text (505) 347-2895 with how many doors your master key opens and whether any key is missing, and we will quote the exact price on the phone before we come. Facility managers can also start at our locksmith for facility managers page. Save the number in your building's emergency contact list today.

This guide is general information about master key systems. Your hardware, your building and your local fire and building codes decide the right fix, so have a locksmith look at the actual doors before you buy anything.

FAQs

Roadrunner Lock and Key logo

Roadrunner Lock and KeyAnswers from the shop

Open 24/7

Pick a question, or search above. You get the straight answer, the way we would give it on the phone.

How can I protect my master key system from unauthorized duplication if patented keyways aren't an option?

To protect your master key system from unauthorized duplication, even without patented keyways, look into restricted or controlled key systems. These systems make it so that only approved locksmiths or dealers can get blanks through the legitimate channel, adding an extra level of security.

Another option is upgrading to high-security locks that feature specially designed keys, making unauthorized copies much harder to produce. While patented keyways offer legal safeguards for as long as the patent runs, combining restricted systems with well-enforced access control policies can still provide strong protection for your property.

Roadrunner Lock and Key

What should I do right away if my master key is lost or stolen to protect my security?

If a master key goes missing or is stolen, it's crucial to act fast to protect your security. Start by double-checking to make sure the key isn't simply misplaced. Once confirmed, reach out to a professional locksmith right away to rekey or replace the affected locks. If you suspect theft, report the incident to the appropriate authorities to create a record and ensure follow-up. Taking swift action helps safeguard your property and prevents unauthorized access. Fish and Wildlife Service policy treats any lost or stolen key the same way: deactivate it and change the locks.

Roadrunner Lock and Key

What are the best ways to update old lock hardware to improve the security of a master key system?

To boost the security of your master key system, one effective step is to rekey your current locks using high-security pins and cylinders. This approach is cost-efficient and allows you to strengthen security without needing to replace the entire lock mechanism.

For a more comprehensive upgrade, consider switching out older locks for modern high-security locksets specifically designed for master key systems. These advanced locksets often come with features like pick resistance and restricted keyways, providing a stronger defense against unauthorized access.

If your property still uses outdated lock styles, such as skeleton or mortise locks, replacing them with newer models can significantly reduce security risks. Modern locks are engineered to work with master key systems while offering better protection against tampering. Not sure which option suits your needs? A professional locksmith can provide tailored advice to help you make the best choice. Ask for the ANSI/BHMA grade of each lockset; grade 1 is the highest.

Roadrunner Lock and Key

What are the downsides of using a master key?

A master key trades security for convenience. One lost master exposes every door it opens, and the fix is rekeying all of them: Blaze wrote, "Every mastered lock must be rekeyed". On a conventional system, a change key holder can also work out the master with a few blanks and a file, and the lock shows no sign of it. Copies are easy on an open keyway. Even a patented keyway controls blanks only until its 20-year patent term ends. None of that rules a master system out. It means the master key needs a log, a short list of holders and a plan for the day it goes missing.

Roadrunner Lock and Key

Can a master key open any lock?

No. A master key opens only the locks that were pinned to accept it in its own system. It will not open locks in another building or from another system, unless both were keyed together on purpose. Inside one system there are levels: a change key opens one door, a sub-master opens a group of doors, and the master or grand master opens all of them. That reach is why a lost master is serious. Any lock pinned to it is exposed until it is rekeyed or re-cored, because Blaze's rule after a compromise is that "Every mastered lock must be rekeyed".

Roadrunner Lock and Key

Is a master key system still worth it?

For many buildings, yes, if you run it like a security system and not a convenience. A master system cuts the number of keys staff carry, and the risks are manageable with a written key log, few masters, a restricted keyway with a known patent date and a rekey plan. Blaze's advice is to "consider carefully whether the security risks of mastering outweigh its convenience benefits". Where turnover is high or doors guard records, cash or medication, access control on those doors is the better buy, because a lost card is switched off instead of rekeyed.

Roadrunner Lock and Key

6 questions

Call (505) 347-2895

References

  1. Matt Blaze. Cryptology and Physical Security: Rights Amplification in Master-Keyed Mechanical Locks. IEEE Security and Privacy, March/April 2003; IACR ePrint 2002/160 (revised final version February 6, 2003). Read November 4, 2026. eprint.iacr.org/2002/160 (full text: mattblaze.org/papers/mk.pdf)
  2. U.S. Patent and Trademark Office. Manual of Patent Examining Procedure, 2701 Patent Term [R-01.2024]. Read November 4, 2026. uspto.gov/web/offices/pac/mpep/s2701.html
  3. Legal Information Institute, Cornell Law School. 35 U.S. Code § 154, Contents and term of patent; provisional rights. Read November 4, 2026. law.cornell.edu/uscode/text/35/154
  4. U.S. Fish and Wildlife Service. Service Manual 432 FW 3, Keys, Locks, and Locking Devices. October 19, 2021. Read November 4, 2026. fws.gov/policy-library/432fw3
  5. Rick Daysog, Hawaii News Now. Missing master keys lead to an expensive security fiasco at the state Capitol building. February 2, 2022 (updated February 3, 2022). Read November 4, 2026. hawaiinewsnow.com/2022/02/03/missing-master-keys-lead-an-expensive-security-fiasco-state-capitol-building/
  6. Locksmith Ledger. Interchangeable Core Basics. August 1, 2007. Read November 4, 2026. locksmithledger.com/locks/article/10229658/interchangeable-core-basics
  7. Dave Lubach, FacilitiesNet (Facility Maintenance Decisions). Loss of Master Key Costs College More Than $500,000. February 22, 2016. Read November 4, 2026. facilitiesnet.com/doorshardware/tip.aspx?id=36458
  8. Kristie Borges, NBC Connecticut. Apartment Manager Stole Residents' Jewels. May 13, 2011. Read November 4, 2026. nbcconnecticut.com/news/local/jewelry-thefts-solved-in-greenwich/1884307/
  9. Locksmith Ledger Staff. Napa Valley Keys in Higher Security with Safe Schools. October 1, 2007. Read November 4, 2026. locksmithledger.com/locks/article/10229601/napa-valley-keys-in-higher-security-with-safe-schools
  10. NBC News (The Associated Press). Briefly stolen key helped in N.M. jailbreak. September 24, 2008. Read November 4, 2026. nbcnews.com/id/wbna26875549
  11. Builders Hardware Manufacturers Association (BHMA). Product Grade Levels. No page date shown. Read November 4, 2026. buildershardware.com/ANSI-BHMA-Standards/Product-Grade-Levels
  12. Seattle Police Department. Crime Prevention Bulletin: Home Security, Door Security. PDF created December 9, 2015. Read November 4, 2026. seattle.gov/documents/Departments/Police/Prevention/Home_Security_Door_Security.pdf
  13. WRAL (5 On Your Side), reporting Consumer Reports deadbolt tests. Tests bust deadbolt claims. June 14, 2011. Read November 4, 2026. wral.com/5onyourside/story/9728544/